Exmark VANTAGE S Series Operator's Manual page 21

Figure 9
To turn left or right, pull the motion control lever
back toward neutral in the desired turn direction.
The machine will move faster the farther the
motion control levers are moved from the neutral
position.
4. To stop, position both motion control levers in
the neutral operate position.
Driving in Reverse
1. Move the motion control levers to the neutral
operate position.
2. To move rearward in a straight line, slowly move
both levers rearward with equal pressure.
To turn left or right, release pressure on the
motion control lever toward the desired turn
direction.
3. To stop, position both motion control levers in
the neutral operate position.
Adjusting the Front Reference/Speed
Control Bar
Adjust the front reference/speed control bar for
desired maximum forward speed.
1. Stop the machine and move the motion control
levers to the neutral position.
2. Disengage the PTO.
3. Unlock the handles on both sides of the control
tower by pulling outward (see Figure 11).
21
Operation
Figure 10