Cleaning and care
To reinsert the ice cube container,
push it into the refrigeration appliance
until it clicks into position.
If you cannot push the ice cube con-
tainer back in all the way, turn the
screw conveyor inside a little.
Cleaning the drip tray
The drip tray catches excess water.
To avoid a build-up of odour, the drip
tray should be cleaned every day.
Remove the drip tray grille.
Remove the drip tray and clean it.
Dry the drip tray with a cloth.
Reinsert the drip tray and the drip
tray grille.
Cleaning the door seal
Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
The door seal should be cleaned reg-
ularly with clean water and then
wiped dry with a cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the en-
ergy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example).
106
Cleaning the water filter (In-
tensiveClear mesh filter)
Depending on the quantity of ice cubes
produced, the IntensiveClear mesh filter
must be cleaned approx. every
6 months.
Clean the water filter
display.
Confirm the message with OK.
Turn the cap of the filter cartridge
anti-clockwise until it is in the hori-
zontal position 1. and slide it out of
the filter opening 2.
Pull the filter out of the back of the fil-
ter cartridge 3.).
will appear in the