4. Operation
4-1. Operation Precautions
CAUTION
Do not move the parts used for panning and tilting manually. This may damage the unit.
NOTE
The range may be off by 10% or so due to variations in the magnification caused by focusing and
the pan-tilt head mounting error. Check the actual panning range before proceeding to set to the
subject.
4-1-1. Panning Range
4-1-2. Tilting Range
Tilting center
Panning center
180°
The panning range extends 180° to the left
and right.
A turning range of approx. 217 mm (270
mm with options installed) in diameter
should therefore be taken into account
when selecting the installation location.
Similarly, the tilting range is approx. 220
mm (230 mm with options installed) when
the pan-tilt head is inclined upward at
220° and downward at an 40° (or when
suspended, upward at 40° and downward
at 220°).
Also take this into account when selecting
the installation location.
E9