Effects - Vox AD100VT-XL Owner's Manual

E
FFECTS
The XL-series provides eleven of the most popular effects (some effects actually com-
bine two effects). you can adjust the SPEED parameter of modulation effects or the TIME
parameter of delay/reverb effects simply by pressing the TAP switch twice. In addition to
using the EDIT 1 knob to adjust the most important parameters, you can make more
detailed adjustments by holding down the TAP button or BYPASS button while turning the
EDIT 1 knob.
TYPE
OCTAVE
COMP
COMP+PHASER
COMP+CHORUS
CHORUS+DELAY
CHORUS+REVERB
FLANGER+REVERB
TREMOLO+REVERB
ROTARY+REVERB
DELAY
REVERB
NOTE: In order to adjust the effect parameters, Effect Bypass must be off (BYPASS LED
dark). If you hold down the TAP switch and turn the EDIT 1 knob when bypass is on
(BYPASS LED lit), you'll be adjusting the noise reduction — not the effect parameter.
HINT: If don't want to use an effect in a channel program, select either DELAY or
REVERB as the effect type, and turn the EDIT 1 knob all the way to the left. This will set
the DELAY LEVEL or REVERB LEVEL to the minimum setting.
OCTAVE
This effect generates a note one octaves lower than the one you're playing, adding thick-
ness and "weight" to single note lines.
EDIT1
HINT:Like all pedals of this type, OCTAVE only works with single notes...chords confuse
the heck out of it! NOT a fault - that's just the way these pedals operate.
TAP EDIT 1
OCTAVE LEVEL
COMP SENS
PHASER SPEED COMP SENS
CHORUS SPEED COMP SENS
DELAY TIME DELAY LEVEL
CHORUS SPEED REVERB LEVEL
FLANGER SPEED REVERB LEVEL
TREMOLO SPEED REVERB LEVEL
ROTARY SPEED REVERB LEVEL
DELAY TIME DELAY LEVEL
REVERB TIME REVERB LEVEL
"MIX" Adjusts the mix level of the note one octave below.
EDIT 2 EDIT 3
[TAP+EDIT 1] [BYPASS+EDIT 1]
COMP ATTACK
PHASER SPEED PHASER RESONANCE
CHORUS SPEED CHORUS MIX
DELAY TIME CHORUS MIX
CHORUS SPEED CHORUS MIX
FLANGER SPEED FLANGER RESONANCE
TREMOLO SPEED TREMOLO DEPTH
ROTARY SPEED ROTARY SENS
DELAY TIME DELAY FEEDBACK
REVERB TIME REVERB HIDAMP
25