Returning The Jack And Spare Wheel To The Storage Space - Volvo V50 User Manual

2006 Volvo V50
snug.
4. Lower the vehicle to the ground and alternately tighten the bolts crosswise to 62 ft. lbs. (85 Nm).
5. Install the wheel cap (where applicable).

Returning the jack and spare wheel to the storage space

1. Crank the jack (1) down approximately halfway until the mark on the washer (2) aligns with the mark
on the jack's arm (3).
2. Place the jack in the storage space. Fold in the jack's crank (4) and place the lug wrench (5) on the
jack.
3. Screw the jack's retaining pin into hole 6 so that it holds the jack securely in place.
4. Place the spare wheel (7) over the jack.
5. Insert the spare wheel's retaining pin through the center hole in the spare wheel so that it aligns with
hole 8. Screw the retaining pin into hole 8 so that it holds the spare wheel securely in place.
file:///K|/ownersdocs/2006/2006_V50/06v50_08a.htm (18 of 18)12/30/2006 4:49:39 PM
Contents | Top of Page