Transferring Midi Data; Disabling The Bluetooth Functionality - Roland Go Piano Owner's Manual

Transferring MIDI Data

Here's how to make settings for transmitting and receiving MIDI
data between this unit and the mobile device.
Note when using an already-paired iOS device
The following operation is required after each time that you
execute a factory reset.
GO:PIANO MIDI
1
Disconnect "GO:PIANO MIDI."
GO:PIANO MIDI
For details, refer to the owner's manual of your iOS device.
* Make sure that this unit's Bluetooth function is "On"
(settings0"BLUETOOTH" turned "On").
1
Place the mobile device that you want to connect
nearby this unit.
MEMO
If you have more than one unit of this model, power-on only
the unit that you want to pair (power-off the other units).
2
Turn on the Bluetooth function of the mobile
device.
MEMO
The explanation here uses the iPhone as an example. For
details, refer to the owner's manual of your mobile device.
3
In the mobile device's app (e.g., Piano Partner 2),
establish a connection with this unit.
NOTE
Do not tap the "GO:PIANO MIDI" that is shown in the
Bluetooth settings of the mobile device.

Disabling the Bluetooth Functionality

Disable the Bluetooth functionality if you don't want this unit to
be connected via Bluetooth with your mobile device.
1
In settings (p. 6), make the display indicate
BLUETOOTH.
2
Use the [–] [+] buttons to turn the setting "Off."
3
Press the [
settings.
2
Turn off.
Using the Bluetooth® Functionality
] button when you're finished making
9