Serial Port - Toshiba TECRA A10/S10/M10/SATELLITEPRO S300 TECRA S10 User Manual

Disconnecting the i.LINK (IEEE1394) cable
To disconnect the i.LINK (IEEE1394) cable, follow the steps as detailed
below:
1. Open the Safely Remove Hardware icon on the Windows Taskbar.
2. Point to i.LINK (IEEE1394) device and click.
3. Disconnect the cable from the computer then from the i.LINK device.
Refer also to the documentation that came with your i.LINK device.

Serial port

The serial connector can be used to connect to RS-232C compatible
devices.
RS-232C compatible devices include the following:
Modem
Mouse
Printer
Some models are equipped with a serial port.
To connect a serial port, follow the steps as detailed below:
1. Turn the computer's power off.
2. Connect the serial connector to the serial port and tighten the screws on
the left and right hand side.
Serial connector
User's Manual
Serial port
Figure 3-17 Connecting the serial connector to the serial port
TECRA A10/S10/M10/SatellitePro S300
3-33