Alarm, Error And System Messages; Feedback From The Reader - Siemens SIMATIC MV320 Operating Instructions Manual

Alarm, error and system messages

7.1

Feedback from the reader

Table 7- 1
Situation
SIMATIC MV320 is turned on.
Successful establishment of the con-
nection between SIMATIC MV320 and
the host (by cable).
Decoding attempt active.
Decoding and data transfer successful. Green LED flashes
Configuration code successfully
decoded and processed.
Configuration code successfully
decoded but not successfully
processed.
Table 7- 2
Situation
SIMATIC MV325 turned on
successfully.
SIMATIC MV325 connected to host
successfully.
SIMATIC MV325 not connected to host
successfully.
Decoding and data transfer successful. Read display flashes
Decoding and data transfer not
successful.
Configuration code successfully
decoded and processed.
Configuration code not successfully
decoded and processed.
Batch mode enabled and no data
stored
Batch mode enabled and data stored.
SIMATIC MV320 / SIMATIC MV325
Operating Instructions, 08/2015, C79000-G8976-C352-03
SIMATIC MV320
SIMATIC MV325
LED displays on the Acoustic signal
reader
Green LED flashes
Green LED goes off
after connection
establishment
Green LED is off --
Green LED flashes
Green LED flashes
LED displays on the Acoustic signal
reader
All LEDs flash
Wireless symbol
flashes
--
--
Read display flashes
--
Batch symbol off --
Batch symbol flash- --
ing
Vibration signal
1x
1x
--
1x
2x
4x
Vibration signal
1x
1x
3x --
1x
3x --
2x
4x --
--
--
7
39