Charging Station With Base Plate Secured To A Working Surface - Siemens SIMATIC MV320 Operating Instructions Manual

3.3

Charging station with base plate secured to a working surface

1. Insert the USB cable or power cable with the cylindrical side into the charging station.
Figure 3-8
To mount the charging station on a working surface:
2. Lay the side of the base plate marked with "THIS SIDE DOWN" on the supporting
surface.
3. Secure the base plate to the working surface with screws through the pre-drilled mounting
holes
Note
Mounting screws are not supplied with the product
Since the mounting surfaces can differ, the mounting screws are not supplied with the
product.
Figure 3-9
SIMATIC MV320 / SIMATIC MV325
Operating Instructions, 08/2015, C79000-G8976-C352-03
3.3 Charging station with base plate secured to a working surface
Inserting the USB cable/power cable into the charging station
①
.
Base plate: Mounting holes
Installing and connecting (SIMATIC MV325)
19