Programming For Vcr; Programming For Cable Or Satellite Set-Top Box - Vizio VF550XVT1A User Manual

VIZIO VF550XVT1A User Manual
Programming the VIZIO Universal
Chapter 5
You can program the remote control to work with up to four different pieces of equipment including your
VIZIO HDTV. Listed below are the steps for programming your VCR, Cable Box and DVD Player.

Programming for VCR

1. Manually turn on the VCR.
2. Press the DVD button on the remote control.
DVD player, use the DVD device button. If you plan to also program the remote for a DVD player, the
AUDIO device button may be used as a substitute.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your VCR in the code list in the back of this book and enter it using
the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component
and manufacturer.
5. Point the remote control at the VCR and press the POWER button. The VCR will turn off.
Note:
!
If your VCR does not respond, try all the codes for your VCR brand. If the codes do not work, or
your brand is not listed, see "Searching for Component Codes."
!
Sometimes a code listed will only include limited functions. Try other codes that may include
more functionality.

Programming for Cable or Satellite Set-Top Box

1. Manually turn on the Cable Box.
2. Press the CABLE button on the remote control.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your Cable Box in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and
manufacturer.
5. Point the remote control at the Cable Box and press the POWER button. The Cable Box will turn off.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and
manufacturer.
Note:
!
If your Cable Set-Top Box does not respond, try all the codes for your brand. If the codes do not
work, or your brand is not listed, see "Searching for Component Codes."
!
Sometimes a code listed will only include limited functions. Try other codes that may include
more functionality.
Remote Control
NOTE: If you do not intend to program the remote for a
80
www.VIZIO.com