Rear Panel Connections - Vizio VA19L HDTV10T User Manual

Rear Panel Connections

1
3
4
2
No. Connection
1 HDMI 1
2 HDMI 2
3 RGB PC
4 HDMI Audio
COMPONENT
5 (YPb/CbPr/Cr
with Audio L/R)
6 PC Audio
7 SPDIF
8 SERVICE
DTV/TV
9
(Cable/Antenna)
10 AC IN
Version 9/12/2008
5
6
7
8
Description
Connect the primary source for digital video such as a DVD multimedia player
or set-top box.
Connect a secondary source for digital video such as a DVD multimedia player
or set-top box.
To use to a DVI enabled device, connect a DVI-HDMI cable here and connect
the analog audio output of the device to the L+R HDMI Audio ports. VIZIO
Certified HDMI and HDMI-DVI cables are available for purchase from
www.VIZIO.com or by calling 888-VIZIOCE (888-849-4623).
Connect the video from a computer here.
Connect the analog audio output of a device to the L+R AUDIO here when
using a DVI enabled device that is connected to the HDMI2 port.
Connect a DVD Player or set top box here. From left to right, use white for left
audio and red for right audio, green for Y, blue for Pb (or Cb), and red for Pr (or
Cr) inputs.
Connect the audio (1/8 in. mini plug stereo connector) from a computer here.
When the DTV input is selected for viewing, the audio associated with the
programming will be available on this SPDIF Optical connector for connection
to your home theater system.
For factory service only. Use of this input for any purpose other than factory
authorized service will void the manufacturer's warranty of this equipment.
Connect to an antenna or digital cable for digital TV. For digital TV stations in
your area visit www.antennaweb.org.
Connect the supplied AC power cord. Jenn: where did the AC IN port go??
www.VIZIO.com
VIZIO VA19L HDTV10T User's Manual
9
10
10