VIZIO SV421XVT & SV471XVT User Manual
Channel Info
Channel Info displays the technical information of the channel including channel number, frequency,
modulation type, status, SNR (signal noise ratio), and signal strength.
Setup Menu
1. Press the MENU button on the remote control and the Picture menu will be shown on the screen.
!
"
2. Press
or
on the remote control to highlight the Setup menu, and then press OK to select it.
!
"
3. Press
or
on the remote control to select Setup menu option.
4.
Once the menu option is highlig
5. Press the M
ENU key once to return to the previous screen or repeatedly to return to your program if
the task has
been completed.
Language
Select to chang
e the Language of the OSD. The default is English. You can
also select Espa
ñol or Français.
PIP
Your TV fea
tures PIP mode so you can watch two pictures at the same time.
One picture is displayed as the full scr
is displayed in a small windo
Note:
PIP is only available when the Rating Enable op
Controls Menu is OFF.
To select the options in the PIP sub-menu, press the OK button.
will be displayed showing the following PIP settings:
PIP Mode
Select fr
om Off, PIP or POP (Picture-outside picture). In PIP mode a smaller sub-screen is
displayed on top of the main screen. In POP mode the main screen and sub-screen are of equal
size and are positioned side-by-side.
hted, press $ or # on the remote control to adjust the setting.
een (main screen) and the other picture
w (sub screen).
www.VIZIO.com
tion in the Parental
A new menu
46