Samsung 4+ Series E-Manual page 11

Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first
attach a "Samsung Wireless LAN Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to the
the side of your TV. See the illustration below.
The LAN Port on the Wall
Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites. Samsung's Wireless
LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n.
When you play video over a network connection, the video may not be played smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an access
point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES
(WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification
specifications.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable, depending on your network setup. They are
illustrated below:
The Modem Port on the Wall
The LAN Port on the Wall
✎
It is not supported when the network speed is below or equal to 10Mbps.
✎
Use Cat 5(*STP Type) cable for the connection. (*Shielded Twist Pair)
[PD490-ZD]BN68-04070A.indb 11
Network Connection
Wireless IP Sharer
(AP having DHCP Server)
LAN Cable (Not Supplied)
Modem Cable
English - 11
TV Side Panel
External Modem
(ADSL / VDSL / Cable TV)
LAN Cable
LAN Cable
USB port on
Samsung Wireless
LAN Adapter
TV Rear Panel
TV Rear Panel
2012-01-27 11:30:16