Panasonic ER‑GB37 Operating Instructions Manual page 12

Cleaningwithwater
1. Clean the trimmer, the blade
and the comb attachment with
running water.
Rinse with water and shake
up and down several times to
remove the water.
2. Wipe off the water with a towel
and let it dry naturally.
It will dry faster with the blade
removed.
3. Apply the oil to the blade after
drying.(See this page.)
4. Attach the blade and comb
attachment to the trimmer.
Cleaningwiththebrush
1. Brush off any hair trimmings from the
main body and from around the blade.
12
ER-GB37_ME.indb 12
2. Brush any hair trimmings out from
between the stationary blade and
the moving blade while pressing
down the cleaning lever to raise the
moving blade.
3. Apply the oil to the blade.
4. Attach the blade and comb attachment to the trimmer.
Lubrication
Apply the oil to the trimmer
before and after each use.
Apply a drop of the oil to the
points indicated by the arrows.
Remountingtheblade
Fit the mounting hook into the
blade mounting on the trimmer
and then push in until you
hear a click.
2013/07/16 13:30:55