Physical Description - Vivotek FD7132 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Physical description

Built-in MIC
Indented reset button
Image adjustment screw
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect external
input / output devices. The pin definitions are described below.
4 - User's Manual
Lens
Tilt screw
PIR sensor
Pan screw
General I/O terminal block
1 2 3 4
Light sensor
IR LEDs
I/O
1 2 3 4
Audio Out Mic. In Ext. Int.
Audio out
Drill holes
Dome cover
1: Power
2: Digital output
3: Digital input
4: Ground
Status LED
Ethernet 10/100 RJ45 socket
Power cord socket
Focus controller
Zoom controller
MIC in
External/Internal MIC switch
Keep a note of the MAC address
before installing the camera.
Network Camera
RoHS
C I
Model No: FD7132
MAC:0002D107258A
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Made in Taiwan
Pat. 6,930,709