Installing Photags Express Software - Vivitar ViviCam X327 Owner's Manual

3. Press the Up/Down button to select "This Image" (if the image is a photo) or "This Video" (if the
image is a video) to delete the current photo or video you selected or select the corresponding "All"
option to delete all unprotected images. Press Cancel to exit the Delete option if you do not wish to
delete anything at this stage.
4. Press the MENU button to confirm.
5. A Delete confirmation message appears.
6. Press the Right/Left button to select "Yes" or "No".
7. Press the MENU button to confirm and delete the image(s).
Note: You cannot delete files that are locked.
Caution: If you choice the All option, all the unprotected video images on your SD card will be deleted.
This process is irreversible and all your images will be lost forever unless you have saved them or
downloaded them to your computer previous to the deletion.

Installing PhoTags Express Software

In order to install the Software to download the photos and videos captured using this camera to your
computer, you need to install the CD installation disk.
Insert the installation CD into your CD-ROM drive. The installation screen should automatically open.
Warning: DO NOT PLUG YOUR CAMERA INTO THE USB PORT UNTIL THE SOFTWARE
INSTALLATION HAS BEEN COMPLETELY INSTALLED. IF YOUR CAMERA IS CONNECTEDTO THE
37