Vivitar DVR-508 User Manual page 48

4. To turn on or off the sound the Shutter makes when pressed, use the Right/Left button to
select „On‟ or „Off‟.
5. Press the OK button to save your choice.
The set the Start-up sound, press the Left/Right button to select „On‟ or „Off‟
6.
7. Press the OK button to save your choice.
8. To turn on or off the Beep sound the camcorder makes when pressing a button, use the
Right/Left button to select „On‟ or „Off‟.
9. Press the OK button to save your choice.
10. To adjust the sound Volume for buttons that emit sounds when pressed, use the Right/Left
button to select 0, 1, 2 or 3.
11. Press the OK button to save your choice.
12. Press the MENU button to close the menu and exit the Setup function.
Power Frequency
In this Setup mode you can adjust the light frequency depending on the region you are located.
Generally, 60HZ is for the U.S. and Canada, 50HZ for Europe and Japan.
47