Vivitar DVR-508 User Manual page 27

5. Press the MENU button to revert back to the Camera capture mode to start taking photos with
the quality selected.
Metering
This setting allows you to change the area of light exposure of the photo.
1. Press the Up/Down button to select the Metering menu.
2. Press the OK button to open the Metering submenu.
3. Press the Up/Down button to highlight and select the metering option:
[Center]: The exposure will be calculated based on light in the center area and this is
suitable for general use.
[Multi]: The exposure will be calculated based on the average light.
[Spot]: Only the spot in the center of the LCD screen will be metered for light.
4. Press the OK button to confirm, save your choice and exit to the Setting menu.
5. Press the MENU button to revert back to the Camera capture mode to start taking photos with
the metering selected.
26