Average Fuel Consumption / 5-Minute Average Fuel Consumption - MARUTI SUZUKI Dzire Manual

Instantaneous fuel consumption
The display shows instantaneous fuel con-
sumption with a bar graph only when the
vehicle is moving.
EXAMPLE
(4)
56RM02016
(4) Instantaneous fuel consumption
NOTE:
• The display does not show the bar graph
unless the vehicle is moving.
• Depending on the vehicle's specification,
the fuel consumption units of initial set-
ting are indicated as L/100km, km/L,
MPG (UK).
• The indicated maximum value of instan-
taneous fuel consumption is one of the
followings. No more than the maximum
value will be indicated on the display
even if the actual instantaneous fuel
consumption is higher.
– For L/100km setting: 30
– For km/L setting: 50
– For MPG (UK) setting: 80
• The indication on the display may be
delayed if fuel consumption is greatly
affected by driving conditions.
• The display shows estimated values.
Indications may not be the same as
actual values.
Average fuel consumption / 5-minute
average fuel consumption / 1-driving
cycle average fuel consumption
Average fuel consumption from previous
reset and 5-minute average fuel consump-
tion, and 1-driving cycle average fuel con-
sumption are shown.
(Average fuel consumption)
EXAMPLE
(5)
(5)
56RM02017
(5) Average fuel consumption
BEFORE DRIVING
If you selected average fuel consumption
the last time you drove the vehicle, the dis-
play shows the last value of average fuel
consumption from previous driving when
the ignition is pushed to "ON" mode.
Unless you reset the value of average fuel
consumption, the display indicates the
value of average fuel consumption based
on the average fuel consumption during
previous driving.
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the value of average
fuel consumption will be shown after driv-
ing for a period of time.
You can select the timing to reset the value
of average fuel consumption by one of the
following three methods;
• Reset after refuel: the value of average
fuel consumption will be reset automati-
cally by refueling.
• Reset with trip meter A: the value of
average fuel consumption will be reset
automatically by resetting trip meter A.
• Reset manually: the value of average
fuel consumption will be reset by push-
ing and holding the indicator selector
knob (3) when the display indicates the
average fuel consumption.
To change the timing to reset the value of
average fuel consumption, refer to "Setting
mode" in this section.
56RH0-74E
2-74