Morphy Richards Supervac gold Instructions Manual page 6

VC731011MUK Rev1.qxp_Instruction Book 05/03/2020 10:44 Page 6
Switching on and power settings
Assemble the product for upright vacuum cleaning
(see 'Upright vacuuming: assembly').
To switch ON, slide the On/Off button (1) forward. At
the first position the product will switch on at LOW
power, push the slider again to the second position for
HIGH power. Slide the button rearwards to switch back
to LOW power or OFF.
The HIGH setting will produce the best cleaning results
for the majority of cleaning tasks. Using on LOW power
will be sufficient for light cleaning and will extend the
usage time before the battery needs recharging.
If the motorised floor brush (19) is fitted, the brush will
rotate and the floor brush lights (20) will illuminate.
NOTE: As the battery discharges during use, the
number of illuminated charge indicator lights (7) will
reduce until all lights extinguish. The product must
then be recharged.
6