Powering On/Off Your Digital Video Camera - Vivitar DVR 620V3 User Manual

Powering ON/OFF Your Digital Video Camera

 Make sure the batteries have been inserted properly into your digital video camera.
 If your camera comes with a rechargeable lithium battery, make sure it is fully charged before
the first use.
 Make sure an SD card has been inserted into your camera.
(SD card up to 16GB - SD Card not included)
Powering the camera ON
Press the Power
The camera will be in Video Capture mode to start.
Powering the camera OFF
While the camera is on, you can press the Power
camera OFF. You will see a "Goodbye" splash screen and then the camera will power off
completely.
Note: When there is insufficient battery power, a "Low Battery" message will appear on the LCD
screen. The digital video camera will automatically power off a few moments later.
Auto Power Saving
Your digital video camera has an Auto Power Off feature that will automatically turn off the
camera if it has not been in use after 3 minutes.
button to turn your camera ON.
button again at any point to turn your
10