Using Hp Pc Hardware Diagnostics (Uefi); Downloading Hp Pc Hardware Diagnostics (Uefi) - HP Pro Tablet 608 G1 User Manual

11 Using HP PC Hardware Diagnostics
(UEFI)
HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run
diagnostic tests to determine whether the tablet hardware is functioning properly. The tool runs
outside the operating system so that it can isolate hardware failures from issues that are caused by
the operating system or other software components.
To start HP PC Hardware Diagnostics (UEFI):
1. Turn off the tablet.
2. Press and hold the power and volume down buttons at the same time until the tablet turns on.
The Startup menu is displayed.
3. Tap F2 System Diagnostics.
4. When the diagnostic tool opens, select the type of diagnostic test you want to run, and then
follow the on-screen instructions.
NOTE: If you need to stop a diagnostic test, press the volume down button.

Downloading HP PC Hardware Diagnostics (UEFI)

NOTE: Instructions for downloading HP PC Hardware Diagnostics (UEFI) are provided in English
only.
The preferred method is to download UEFI to your tablet. You can also download UEFI to a USB
device; depending on the type of USB device used, an adapter for the USB Type-C port may needed
to transfer the data to the tablet.
There are two options to download HP PC Hardware Diagnostics:
Option 1: HP PC Diagnostics homepage— Provides access to the latest UEFI version
1. Go to http://www.hp.com/go/techcenter/pcdiags.
2. Click the Download link under HP PC Hardware Diagnostics, and then select Run.
Option 2: Support and Drivers pages—Provide downloads for a specific product for earlier and later
versions
1. Go to http://www.hp.com.
2. Point to Support, located at the top of the page, and then click Download Drivers.
3. In the text box, enter the product name, and then click Go.
– or –
Click Find Now to let HP automatically detect your product.
Downloading HP PC Hardware Diagnostics (UEFI) 35