GE GSD4410 Owner's Manual page 26

ii!iliiiiiiiliii!iiliiiiiii i i
Before you call for service...
Troubleshooting Tips
Cloudiness on
glassware
PossibleCauses
What To Do
Combination of soft
water and too much
detergent
Water temperature
entering the dishwasher
exceeds 150°F.
This is called etching and
is pemlanent. To prevent
tllis tiom happening, use
less deter,gent if you have
soft water. Wash glassware
in tile shortest cycle tllat
will get diem clean.
Lower tile water heater
temperature.
Black or gray
Aluminum utensils have
marks on dishes
rubbed against dishes
Yellow or brown film Tea or coffee stains
on inside surfaces
An overall yellow or
brown film can be caused
by iron deposits in water
White film on inside
surfaces
Hard water minerals
Remove marks _dth a mild,
abrasive cleaner.
Remove file stain by hand,
using a solulion of 1/2 cup
bleach and 3 cups warm
water.
WARNING
Bef_ne cleaning interior
wait at least 20 minutes
after a cycle tk)r the
heating element to cool
d(mI1. Faihlre to do st) can
resuh in bums.
A special fiher in the water
supply line is tile only way
to correct this problem.
Contact a water sotiener
company.
To clean the inlefior, apply
dishwasher detergent to a
damp sponge. Wear
robber gloves. Do not use
any lype of cleanser other
lhan dishwasher delergenl
because it may cause
ti_aming or sudsing.
2_