ADTRAN NetVanta 7000 Series Hardware Installation Manual page 5

NetVanta 7000 Series Hardware Installation Guide
FCC-Required Information
FCC regulations require that the following information be provided in this manual:
1. This equipment complies with Part 68 of Federal Communications Commission (FCC) rules and
requirements adopted by America's Carriers Telecommunications Association (ACTA). Each
registered interface has a label that contains, among other information, a product identifier in the
format US:AAAEQ##TXXXX. If requested, provide this information to the telephone company.
2. If this equipment causes harm to the telephone network, the telephone company may temporarily
discontinue service. If possible, advance notification is given; otherwise, notification is given as
soon as possible. The telephone company will advise the customer of the right to file a complaint
with the FCC.
3. The telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the proper operation of this equipment. Advance notification and the opportunity
to maintain uninterrupted service are given.
4. If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty
information. The telephone company may require this equipment to be disconnected from the
network until the problem is corrected, or it is certain the equipment is not malfunctioning.
5. This unit contains no user-serviceable parts.
6. This equipment is designed to connect to the telephone network or premises wiring using an
FCC-compatible modular jack, which is compliant with Part 68 and requirements adopted by
ACTA.
7. The following information may be required when applying to the local telephone company for
leased line facilities
Registration
Part Number
1202862L1 US: HDCDENAN1202862L1
1202872L1 US: HDCDENAN1200872L1
1200695L1 US: HDCDENAN1200695L1
1202869E1 US: HDCDL01A1200869L1
1202691G1 US: HDCMM01B1200691L1
1202692G1 US: HDCMM01B1200691L1
1200796E1 US: HDCIS01B1200796L1
1700706G1 US: HDCIS01B1700706G1
8. The ringer equivalence number (REN) is useful in determining the quantity of devices you may
connect to your telephone line and still have all of those devices ring when your number is called.
In most areas, the sum of the RENs of all devices should not exceed five. To be certain of the
number of devices you may connect to your line as determined by the REN, call your telephone
company to determine the maximum REN for your calling area.
9. This equipment may not be used on coin service provided by the telephone company. Connection
to party lines is subject to state tariffs. Contact your state public utility commission or corporation
commission for information.
61200796L1-34L
Number
1.544 Mbps - SF
1.544 Mbps - SF and B8ZS
1.544 Mbps - ESF
1.544 Mbps - ESF and B8ZS
ADSL, ADSL2, ADSL2+
Analog Loop Start/Ground
Start
Copyright © 2014 ADTRAN, Inc.
Service Type REN/SOC
N/A/6.0N
FCC-Required Information
FIC
04DU9-BN
04DU9-DN
04DU9-1KN
04DU9-1SN
0.1A Metallic
0.1B 02LS2/02GS2
USOC
RJ-48C
RJ-11C
RJ-11C
5