ADTRAN NetVanta 7000 Series Hardware Installation Manual page 22

Physical Description
NIM/VIM Option Slots
The two NIM/VIM option slots (labeled
NIM/VIM option modules (refer to
FXS and FXO Ports
The two FXS interfaces (labeled
and
TRUNKS 0/1 0/2
During power outages, the FXS interfaces are connected directly to the FXO interfaces. This feature is
called life line mode, and allows customers to make analog calls even when the power is out.
For the NetVanta 7000 Series, devices connected to the FXS (FXS STATIONS) ports
must be ACTA/FCC Part 68 compliant due to the direct connection to the public
switched telephone network (PSTN) in life line mode.
MOH
The music on hold ( MOH
hold. An external music source is required.
Page
The PAGE port is a 3.5 mm jack for paging output. Overhead paging equipment is required.
10/100Base-T Ethernet Interface
The Ethernet port ( ETH 0/0
• 10Base-T or 100Base-T with a single connector
• Auto-negotiation
• CSMA/CD
• IEEE 802.3 compatibility
Door Relay
The DOOR RELAY contacts are connected to a built-in relay that can be activated by using a special
prefix (SPRE) code (applications include door locks and other remote control needs).
CONSOLE Interface
The CONSOLE interface is an EIA-232 serial port (DCE), which provides for local management and
configuration (via a DB-9 female connector).
Connection directly to an external modem requires a cross-over cable.
Power Connection
The rear panel has a power input to the AC universal power supply. Please refer to
the Unit on page 37 for connection details.
22
SLOT 1 NIM/VIM
Option Modules on page
FXS STATIONS 0/1
) provide FXS and FXO connectivity, respectively.
) port is a 3.5 mm jack for music input to be played when a call is placed on
) is an RJ-45 connector. The Ethernet port provides the following:
Copyright © 2014 ADTRAN, Inc.
NetVanta 7000 Series Hardware Installation Guide
and
SLOT 2 NIM/VIM
23).
and ) and two FXO interfaces (labeled
0/2
) accept a variety of
FXO
Supplying Power to
61200796L1-34L