Table of Contents
Advertisement
44
V
N
ISIONEER
ETSCAN
Fax Settings : Used to specify additional fax settings.
Item
Transmission
Report
Fit to Page
Detect Dial
Tone
Detect Busy
Tone
Manual
Receive
ECM Mode
* Factory Default
4000 U
'
G
SER
S
UIDE
Description
Select if you want to print the fax transmission report. This report
lists the time and date of transmission and whether the transmission
was successful (OK). If you select Yes, a report will be printed after
each transmission. If you select Error, the report will only be printed
when a fax fails to transmit.
Choices: *Yes, No, Error only
Choose Enable to scale the entire contents of your receiving fax to fit
into the paper of the printer. If this setting is disabled, an incoming
image larger than the page splits across multiple pages.
Choices: *Enable, Disable
Choose Enable to allow this scanner to wait for and detect a dial
tone before proceeding with dialing. If you are using the scanner on
the same line as your phone, turn on the detect dial tone setting.
This will prevent the scanner from sending a fax while someone is on
the phone.
Choices: Enable, *Disable
Choose Enable to allow this scanner to detect a busy tone when
sending a fax.
Choices: *Enable, Disable
(The default setting varies based on country code.)
Choose Enable to use the Manual Receive fax function or Disable to
use the auto receive fax function. When Manual Receive is enabled,
and there is an incoming fax, and the machine starts ringing you
need to press the Start button, in the Fax working mode, to receive
and print the fax.
Choices: Enable, *Disable
Choose Enable to use "ECM Mode". The Error Correction Mode
function helps this scanner to improve communication in areas
where telephone line conditions are poor.
Choices: *Enable, Disable
Advertisement
Table of Contents
