Table of Contents
Advertisement
Copier Default : Used to specify the scanner's default copy settings. Note when the system
auto reset time is over, or the device is turned on and off again, the copy settings will be reset to
these values.
Item
Description
Image Density The image density can be adjusted within a range of 7 levels using
the control panel, or using the scanner's Web Page. Increasing the
value makes the printouts darker, decreasing the value makes the
printouts lighter.
Choices: 1, 2, 3, *4, 5, 6, 7
Copy Mode
Choose the focus of your copy result. For example, if your document
contains pictures, choose Photo for clearer graphic quality. If your
document contains text only, choose Text. Speed mode is the
standard mode for all documents.
Choices: *Speed, Text, Photo
Erase Border
Sets the width of the border you want removed from the image.
Choices:
*0 / 0.25 / 0.5 / 0.75 / 1.0 inch or *0 / 6 / 13 / 19 / 25 mm
Margin
The "Margin Adjustment" option will move the copy image to the
Adjustment
right and/or to the bottom; depending on the "Right" and "Bottom"
parameters.
Choices for Right or Bottom:
*0 / 0.25 / 0.5 / 0.75 / 1.0 inch or *0 / 6 / 13 / 19 / 25 mm
Unit
Choose the unit of measurement you want to use.
Choices: *inch, mm
* Factory Default
Collate
Choose the order you want your copies to be placed in "*Sort" (e.g.
pages 1,2,3 / 1,2,3 / 1,2,3) or "Stack" (e.g. pages 1,1,1 / 2,2,2 /
3,3,3).
Basic
Image Edit
Advanced Copy
S
M
O
UMMARY OF THE
ENU
31
PTIONS
Advertisement
Table of Contents
