Use; Switching The Appliance On/Off; Setting The Dhw Temperature; Draining The Appliance - Bosch Tronic ES 030 Series User And Installation Manual

Use

6 Use
Fig. 11 User interface
[1] Indicator
[2] Temperature selector
CAUTION: The electrical connection must
be done in accordance with the current
domestic electrical compliance installation
regulations.
6.1

Switching the appliance on/off

Turn on
▶ Connect the appliance via a socket with earth connection.
Turn off
▶ Disconnect the appliance from the electric current.
6.2

Setting the DHW temperature

Once the water has reached the selected
temperature level, the appliance stops
heating up (the indicator switches off).
When the water temperature is below the
desired value, the appliance re-starts the
heating cycle (the indicator switches back
on) until it reaches the desired temperature
selected.
The temperature of the water outlet can be regulated, on the
temperature regulator selector up to 65 °C.
12
Increasing the temperature
▶ Turn the temperature selector to the left.
2
1
Fig. 12
Decrease the temperature
▶ Turn the temperature selector to the right.
6720815708-07.1V
Fig. 13
6.3

Draining the appliance

▶ Turn off the appliance from the electric supply.
▶ Switch off the water cutting valve and open a hot water tap.
▶ Open the safety valve (Fig. 14).
+
Increase the temperature
-
Decrease the temperature
DANGER: Burn risk!
Open a hot water tap to and verify the
temperature of the water in the appliance
before opening the safety valve.
▶ Wait until the water temperature
decreases in order to avoid burns or any
other damage.
Tronic – 6 720 816 255 (2018/06)
6720815708-08.1V
6720815708-09.1V