Operating The Self-Propel Drive And Engaging The Blades - Toro TurfMaster HDX Operator's Manual

Operating the Self-Propel Drive and Engaging the Blades

To operate the self-propel drive, pull and hold the drive bail to the handle
To engage the blades, do the following:
1. Push and hold the blade-control lock lever forward to release the blade-control bail (A of
2. Pull the blade-control bail to the handle and release the blade-control-lock lever; the blade should engage
(A of Figure 16).
3. Release the blade-control bail to disengage the blade (B of
to lock the blade-control bail.
Figure 14
Figure 15
Figure 16). The blade-control-lock lever resets
Figure 16
14
(Figure 15).
Figure
g232243
g237184
16).
g237185