Shutting Off The Engine; Operating The Self-Propel Drive And Engaging The Blades - Toro 22298 Operator's Manual

Shutting Off the Engine

Release the blade-control bar and move the
throttle-control lever to the S
Note:
Close the fuel valve by moving the fuel-valve
lever (Figure 14) to the left if you will not be starting
the engine soon afterward.
Operating the Self-Propel
Drive and Engaging the
Blades
This machine has 3 ground speeds: 1 (slow), 2
(medium), and 3 (fast); it also has a Neutral (N)
position. The self-propel-drive lever is located below
and behind the fuel tank
Figure 16
1. Self-propel-drive lever
1. Move the self-propel-drive lever to the desired
ground speed.
position.
TOP
(Figure 16).
Figure 15
2. Start the engine.
3. To operate the self-propel drive, squeeze the
drive bail
Note:
You can vary the ground speed by
increasing or decreasing the distance between
the blade-control bar and the handle.
g024167
16
(Figure 17).
Figure 17
g234784
g238895