Viper Model 480XV Owner's Manual page 30

To enter Valet Mode:
The status LED will light solidly to indicate the system has
entered Valet Mode.
To exit Valet Mode:
1. Turn the ignition on. The system will then automatically
exit Valet mode.
To enter or exit Valet Mode using the transmitter:
1. Open any vehicle door.
2. Press
3. Press
4. Press
The status LED will light solidly if you are entering Valet Mode,
and it will go out if you are exiting Valet Mode.
© 2005 directed electronics, inc.
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
button within 10 seconds.
.
.
again.
DRW-35
31