Basic Controls - Garrett MULTI-FLEX ACE APEX User Manual

2
1
1. Power ON/OFF and MODE—Hold this button for
1 second to turn power ON or OFF. Once detector
is on, use the Mode button to select a different
detection mode, when desired. Press and hold
this button for five seconds to restore detector to
Factory Settings.
2. Plus/Minus and NOTCH DISC. Use Plus/Minus
to change settings while using MENU button
controls and to move cursor when changing
Notch Discrimination.
3. Ground Balance/HOLD—Hold this button down
while ground balancing the detector.
4. Iron Audio—Allows the user to hear discrimi-
nated iron (normally silenced) in order to avoid
digging tricky, undesired flat iron items such as
bottle caps or steel washers.
8

Basic Controls

4 5 6
5. MENU—Press to scroll through Menu settings
6. Pinpoint/OPERATE—Hold this button for pin-
7. Accept/Reject—Accepts or Rejects targets by
7
by continuing to tap this button. Allows access
to Sensitivity, Volume, Iron Volume, Frequency
options, Channel options, Backlight, and Z-Lynk
Wireless pairing.
pointing function, which enables fast recovery
with the smallest hole possible. Press and release
OPERATE button to exit Menu settings.
switching on/off individual Discrimination Seg-
ments from the Target ID Legend. Use in conjunc-
tion with the Plus/Minute buttons to move the
cursor above any desired Notch Discrimination
pixel (see item 2).
2
3