Specifications - VIORE PLC7V96 Operating Instructions Manual

Service & Support
Problem Probable cause
Aerial is disconnected
No signal found
Aerial is damaged/misaligned
Out of digital signal area
No picture or sound Under standby mode
Encrypted channel message It is a pay per view channel
Remote control is not aimed correctly
Front panel obstructed
No response from remote control
Remote control batteries inserted incorrectly
Remote control batteries exhausted
Aerial may not be compatable
Square blocks in picture or picture
Aerial is damaged/misaligned
freezes

Specifications

Video Signal System ATSC/NTSC
Color TFT-LCD
Display Device
Air: 2-69
Receiving Channel
7 inches
Screen Size
1440x234 dot
Screen pixels
Audio output
2CH
DC IN 12V
Power Voltage
Power consumption
15W
Size 220X130X31mm
Weight
0.65kg
Specifications are subject to change without notice.
What to do
Check aerial lead
Check aerial
Check with dealer
Press the POWER button
Select an alternative channel
Aim remote control at front panel
Check for obstructions
Check batteries are inserted correctly
Replace remote control batteries
Check with dealer
Check aerial
Cable: 2-135
20