Sony CDX-4000X Installation/Connections Manual page 12

Left
Gauche
Front speakers
Haut-parieurs avant
Right
Droit
Left
Gauche
Rear s peakers
Haut-parleurs arri6re
Right
Droll
White
Blanc
Black-striped
Noirraye
Gray
Gris
C°D
Black-striped
Noir raye
Green
Ve_
0
C:D
Black-striped
Noir ray_
Purple
Mauve
O
C-D
O
Black-striped
Noir ray_
Red
Rouge
Yellow
laurie
Black
Noir
Notes on the control and power supply leads
• The power antenna control lead (blue) supplies + 12 V DC when you turn on the tuner.
• When your car has built-in FM/AM antenna in the rear/side glass, it is necessary to connect the power antenna
control lead (blue) or the accessory power input lead (red) to the power terminal of the existing antenna booster.
For details, consult your dealer.
• A power antenna without relay box cannot be used with this unit.
Memory hold connection
When the yeflow power input lead isconnected, power will always be supplied to the memory circuit even when
the ignition key i5 turned off.
Notes on speaker connection
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities. Otherwise, the
speakers may be damaged.
• Do not connect the terminals of the speaker system to the car chassis, and do not connect the terminals of the
right speaker with those of the left speaker.
• Do not attempt to connect the speakers in parallel.
• Do not connect any active speakers (with built-in ampfifiers) to the speaker terminals of the unit. Doing so may
damage the active speakers. Therefore, be sure to connect passive speakers to these terminals.
14