Miele DGC 7440 X Operating And Installation Instructions page 153

Issue
The sensor controls do
not respond.
The door cannot be
opened.
A humming sound can
be heard during
operation and after
switching off the steam
oven.
Cause and remedy
You have selected the
So when the steam oven is switched off, the sensor
controls do not respond.
 As soon as the steam oven is switched on, the
sensor controls will respond. If you want the
sensor controls to always respond even when the
steam oven is switched off, select the
QuickTouch | On
The steam oven is not connected to the power
supply.
 Check that the steam oven plug is correctly
inserted into the socket.
 Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
 Touch and hold the  On/Off button until the
display switches off and the steam oven restarts.
You have selected the
The  sensor control does not respond when the
steam oven is switched off.
 As soon as the steam oven is switched on, the
sensor controls will respond. If you want the
sensor controls to always respond even when the
steam oven is switched off, select the
QuickTouch | On
There may be a technical fault.
 If you need to open the door, e.g. because there is
still food in the oven compartment, you will need
to open the door manually (see end of this
chapter).
 If the problem occurs again, contact the Miele
Customer Service Department.
This noise does not indicate incorrect operation or an
appliance fault. The noise is made by water being
pumped through the system.
Problem solving guide
Display | QuickTouch
setting.
Display | QuickTouch
setting.
| Off setting.
|
Display
| Off setting.
|
Display
153