Advertisement
Available languages
Available languages
Quick Links
TRIMMER / EDGER
iNSTRUCTiON MANUAL
Model
Number
GH710
PLEASE READ BEFORE
RETURNING
THiS PRODUCT
FOR ANY REASON:
If you have a question or experience a problem with your
Black & Decker purchase, go to
WWW.BLACKAN DDECKER.COM/INSTANTANSWERS
for instant answers 24 hours a day.
If you can't find the answer or do not have access to the internet,
call 1-800-544-6986
from 8 a.m. to 5 p.m. EST Mon. - Fri
to speak with an agent.
Please have the catalog number available when you call.
SAVE THNS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
POUR LE FRAN(_AIS, VOIR LA COUVERTURE
ARRIERE.
INSTRUCTIVO DE O.PERACION, CENTRO.S DE SERVICIO Y
POLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
o
1
Model No. GH710
KEY INFORMATION
YOU SHOULD
KNOW:
o The guard
must be installed
before trimming
or edging
- if
not, the motor will overheat
(page 5).
o When replacing
the line, use only .065 inch diameter
ROUND
line (B&D Model No. DF-065
is recommended)
-
otherwise
the tool will not function
properly
(page 8).
o Do not bump the feed head against
the ground
- it will
disrupt the feed mechanism.
Always
use the cord retention
feature
(page 7).
Advertisement
