Using Your Toothbrush; Brushing Technique; Timer Setup; Brushing Modes - Braun Oral-B SMART 7000 Manual

need at least a 30-minute charge for one
usage.
• You can always store the handle on the
plugged-in charging unit to maintain it at
full power; a battery overcharge is pre-
vented by device.
Note: Store handle at room temperature
for optimal battery maintenance.
Caution: Do not expose handle to tem-
peratures higher than 50 °C.

Using your toothbrush

Brushing technique

Wet brush head and apply any kind of tooth-
paste. To avoid splashing, guide the brush
head to your teeth before switching on the
handle (picture 2 ). Guide the brush head
slowly from tooth to tooth, spending a few
seconds on each tooth surface. Start brus-
hing the outsides, then the insides and
finally the chewing surfaces. Brush all four
quadrants of your mouth equally (picture
You may also consult your dentist or dental
hygienist about the right technique for you.
In the first days of using any electric tooth-
brush, your gums may bleed slightly. In
general, bleeding should stop after a few
days. Should it persist after 2 weeks, please
consult your dentist or dental hygienist.
If you have sensitive teeth and/or gums,
Oral-B recommends using the «Sensitive»
mode (optional in combination with an
Oral-B «Sensitive» brush head).
Smart Ring features
Your toothbrush is equipped with a Smart
Ring (2) that has various functionalities indi-
cated via different colors of light:
White (default)= Operating and visual timer
light (choose individual color via Oral-B
app settings)
Red = Pressure sensor light
®
Blue = Bluetooth
Timer
You can choose between «Professional» or
«2-Minute» timer.
The «2-Minute» timer signals with a long
stuttering sound and a flashing light of the
Smart Ring (2) that the professionally
recommended 2-minute brushing time has
been reached.
The «Professional» timer signals with a short
stuttering sound and a flashing light of the
pairing indicator
Smart Ring at 30-seconds intervals to move
to the next quadrant of your mouth (picture
3
). A long stuttering sound and a flashing
light indicate the end of the professionally
recommended 2-minute brushing time.
The timer memorizes the elapsed brushing
time, even when the handle is briefly swit-
ched off during brushing. The timer resets if
pausing longer than 30 seconds, briefly
pressing the mode button (4) during pause
or placing the handle on the plugged-in
charger.
Note: During the use of special Oral-B
features, the visual timer light may be deacti-
vated.

Timer setup:

Your toothbrush comes with the «Profes-
sional» timer activated. To change this, press
and hold the mode button (4) for 2 seconds.
Toggle between timer selection by pressing
3
).
the on/off button (3). Confirm selection by
pressing the mode button.
• 2 LED's illuminated indicate «2-Minute»
timer
• 4 LED's illuminated indicate «Professional»
timer
Note: You can also set/advance the timer
functionality via Oral-B
Pressure sensor
If too much pressure is applied, the Smart
Ring (2) will light up in red, reminding you to
reduce pressure. In addition the pulsation of
the brush head will stop and the oscillation
movement of the brush head will be reduced
(during «Daily Clean», «Pro Clean» and «Sen-
sitive» mode) (picture
TM Periodically check the operation of the pres-
sure sensor by pressing moderately on the
brush head during use.
Brushing modes (depending on model)
Your toothbrush offers different brushing
modes indicated on the brushing mode dis-
play (6) on your handle («Daily Clean» mode
does not illuminate on the brushing mode
display):
«Daily Clean»
«Pro Clean»
TM
App.
3
).
– Standard mode for daily
mouth cleaning
– For an extraordinary
clean feeling (operated
with a higher frequency)
TM app
19