Software For Adjustment - Panasonic PT-AE700U Service Manual

PT-AE700U / PT-AE700E
unevenness on the screen by shifting the lever in arrow
directions.
4. Tighten the 2 screws.
7.5.3.4. B Reflector Adjustment
1. Turn on the power and display 100 % white pattern on the
screen.
7.6.

Software for Adjustment

7.6.1. Outline
· This projector needs computer-aided adjustments.
· After the software adjustments, this projector must be turned off and on again to memorize the settings.
· Connect the connection interface and communication cable between the projector and a PC as shown below.
· Updating the software will change the version number.
7.6.2. Operating Procedure
1. Run the software program by the keyboard entry.
Note:
· Use the software program as below.
Adjustment Tool [AE700]
2. The first menu is Port selection menu.
3. Adjust the projector by selecting the necessary item from
the menu in each stage.
7.6.3. Port Name and Projector Selection
Menu
Select the port name of PC which connects with the projector,
then click [Data] or [Adjustment] button.
7.6.3.1. Explanation of Buttons
Data:
Displays the data transmission/reception menu.
Adjustment:
Displays the adjustment menu.
2. Loosen the 2 screws fixing the mirror adjusting lever C just
until the lever can be shifted.
3. Adjust the mirror adjusting lever C position to minimize color
unevenness on the screen by shifting the lever in arrow
directions.
4. Tighten the 2 screws.
Exit:
Exits this application.
22