Cisco Aironet 1400 Series Manual page 26

If you are at the non-root bridge site, make configuration changes to the root
bridge first, then the non-root bridge.
Accessing the Setup Pages
Before accessing the bridge's setup pages, obtain the necessary configuration
information from your network administrator. Then follow these steps to
browse to the bridge's Express Setup page.
1. Open your Internet browser. You must use Microsoft Internet Explorer
(version 5.x or later) or Netscape Navigator (version 4.x or later).
2. Enter the bridge's IP address in the browser address line and press
Enter. An Enter Network Password window appears.
The default IP address for the root bridge is 10.0.0.1. The IP address for
the non-root bridge can be found by going into the root bridge's
Associations page and clicking on the MAC address of the non-root
bridge.
3. Enter the case-sensitive username Cisco and press the Tab key to
advance to the Password field.
4. Enter the case-sensitive password Cisco and press Enter. The Home:
Summary Status page appears.
5. Click Express Setup. The Express Setup page appears.
26