HP 608E Operating And Service Manual page 32

Section V Model 608E/F
Table 5-1. Test Equipment Required Cor Maintenance
Instrument Critical Specifications Recommended Model
Electronic Counter
Frequency Range: 10 MHz to 445 MHz
HP 5245L with 5253B
Accuracy: :1::0.005%
plug-in unit
Power Meter
Range: 10 /,LW to 10 mW
HP 432A
Accuracy: :1::5% of full scale
Thermistor Mount
Frequency Range: 10 to 480 MHz HP 478A
SWR:1.6max
Coaxial Attenuator Attenuation: 10 dB HP 8491A
Coaxial Attenuator Attenuation: 20 dB
HP 8492A
Oscillator Frequency Range: 20 Hz to 30 kHz HP200cD
Envelope Distortion: 0.2% max
Output: 1 V rms
Output Impedance:
BOon
VTVM Voltage Range: 0.1 mV to 300V HP 400E
Decibel Range: -72 to +52 dB
Frequency Range: 20 Hz to 6 MHz
Distortion Analyzer Range: 5 Hz to 600 kHz
HP 334A
Accuracy: ::1::3%
Deviation Meter
Frequency Range: 50 to 150 MHz Measurements Corp.
Accuracy: ::1::3% Model 140
Deviation Range: 0 to 5 kHz
Power Supply -2 to -32 V variable
HP 6217A
OsCilloscope
"F(.r~ical Bandwidth:
5 MHz HP 140A with 1402A and
Vertical sensitivity: 5 mV/cm
1420A plug-in units
Adapter None UG-201A/U
Crystal Detector Frequency Range: 10 MHz to 12.4 GHz HP 423A
VSWR: 1. 2 max
Deviation Crom Square Law: <0.5 dB
over a range of at least 30 dB
Input Impedance:
son
Impedance Output: 15M, 10pf
Dummy Load Resistance: 1000 :1::10%
See Figure 5-2
Wattage: 1/2 W
Pulse Generator Pulse Width: 10$.lsec
HP 214A
Pulse Amplitude: 10 v peak into 2Kn
Pulse Rise and Decay: 0.02 $.lsec max
Repetition Rate: 50 to 5000 pps
Loop Antenna
Special
See Figure 5-1
Spectrum Analyzer
Freq: 400 MHz HP 140S with 8554L and 8552A
Sensltivity: 1
IJ.
V. Absolute calibration Plug-inS.
5-2
•