Requirements; Flashing The Pe100A - Asus PE100A User Manual

4.1

Requirements

Before you start setting up your Edge Computer, please make sure you have
the following available:
• 1 x USB Type-C® cable with data transfer function
(to connect your PC to the PE100A's data port)
• 1 x Power supply
• 1 x Monitor with HDMI cable
• 1 x Keyboard and Mouse set
NOTE: Ensure to use the bundled power supply, or, if you are using
another power supply, ensure to use a 12~24V power supply.
4.2

Flashing the PE100A

Before you begin the flashing procedure, please ensure of the following:
• The PE100A is completely powered off, and the power cord and cables
connecting your PE100A to your computer are all disconnected.
The Boot Mode switch are set to eMMC mode, please refer to Boot
•
Mode switch under the 1.2.2 Onboard switch section for more
information on setting the Boot Mode switch
50 PE100A