Removing The Bottom Cover - Asus PE100A User Manual

IMPORTANT!
• Ensure that your hands are dry before proceeding with the rest
of the installation process. Before installing any of the features in
this guide, use a grounded wrist strap or touch a safely grounded
object or metal object to avoid damaging them due to static
electricity.
• Turn off the power of your Edge Computer, and allow it to cool
for at least 10 minutes before performing any installation/
uninstallation process.
NOTE: The illustrations in this section are for reference only. The slots
may vary depending on model.
3.1

Removing the bottom cover

1. Turn off your Edge Computer then disconnect all cables and
peripherals.
2. Place the Edge Computer on a flat stable surface, with its top side
facing down.
3. Remove the screw from the bottom cover (A), then remove the bottom
cover (B).
34 PE100A