VTech Go!Go! Smart Wheels Tow & Go Garage Parents' Manual page 10

3. Next, assemble and attach the elevator components following the
steps below:
A. Slide the Elevator Platform into the slot on the Elevator Wall,
as shown below. Lift the handle and press down on the Elevator
Platform to lower it.
B. Then, attach the Elevator Wall to the Base and Second Level
Platform, as shown below. You will hear a "click" sound to
indicate the Elevator Wall is secure.
C. Connect the Elevator Bracket to the Elevator Wall and
Elevator Gate, as shown below. Pull down on the Elevator
Bracket to make sure it is secure.
10
10
10