VTech Go! Go! Smart Wheels SmartPoint Vehicle Parents' Manual

Go! Go! Smart Wheels
Parent's Guide
BATTERY INSTALLATION
Make sure the unit is turned OFF.
1.
2. Locate the battery cover on the bottom of the
unit. Use a coin or a screwdriver to loosen
the screw.
3. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the screw
to secure.
WARNING: All packing materials such as tape, plastic sheets,
packaging locks, removable tags, cable ties and
packaging screws are not part of this toy, and should
be discarded for your child's safety.
NOTE: Please keep this parent's guide as it contains important
information.
ATTENTION : Pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d'emballage tels que rubans
adhésifs, feuilles de plastique, attaches, étiquettes et
vis d'emballage. Ils ne font pas partie du jouet.
NOTE : Il est conseillé de conserver ce guide des parents car
il comporte des informations importantes.
Unlock the packaging locks:
Turn the packaging lock counter-
clockwise several times.
Pull out and discard the packaging lock.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable, or new and used batteries.
SmartPoint Vehicle
® ®
1
91-003642-010
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
PRODUCT FEATURES
1. ON/OFF SWITCH
To turn the unit On, slide the On/Off switch to
the On position. To turn the unit Off, slide the
On/Off switch to the Off
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech
automatically power down after approximately 60 seconds without input. The
unit can be turned on again by pressing the Light-Up button or Action button or
pushing the vehicle quickly.
NOTE: This product is in a try-me mode in the packaging. After opening the package,
turn the vehicle off and on again to proceed with normal play. If the unit powers down
while playing, we suggest changing the batteries.
NOTE : Ce produit est actuellement en mode démonstration. Une fois déballé, veuillez
éteindre puis remettre en marche ce jouet pour activer toutes ses fonctionnalités.
ACTIVITIES
Slide the On/Off switch to turn the unit On. You will
1.
hear sounds, a song and a phrase. The light will
flash with the sounds.
Press the Light-Up button to hear sounds, songs,
2.
phrases and melodies. The light will the flash with
the sounds.
US
position.
Go! Go! Smart Wheels
®
®
2
vehicle will