DeWalt P3X Manual page 42

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 31
English
Performance weak or fl uctuating:
Cause(s)
Interior parts of the
device dirty or worn
Barrel can only be pressed against the
surface with much force:
Cause(s)
Foreign object in the
barrel or piston guide
Interior parts of the
device dirty or worn
Bent barrel
Magazine cover does not close:
Cause(s)
More than 10 Shooting
Nails in one magazine
Foreign object in
magazine
Forbidden or
unauthorized Shooting
Nails in the magazine
Poor feeding of Shooting Nails (magazine):
Cause(s)
Foreign object in
magazine
Faulty feeding spring
mechanism in the
magazine
Interior parts of the
device dirty or worn
42
Measure(s)
See chapter 5
„Inspection and
Cleaning"
Measure(s)
See chapter 5
„Inspection and
Cleaning"
Have the Nail Setting
Tool be repaired by an
authorized specialist
workshop
Measure(s)
Remove Shooting Nails
Remove foreign objects
See chapter 2.5
„Shooting Nails" and
chapter 6 „Technical
Data
Measure(s)
Clean magazine
Replace magazine
See chapter 5
„Inspection and
Cleaning"
Barrel is fi rmly pressed against the surface,
but the Shooting Nails are not fi red when
pulling the trigger:
Cause(s)
Barrel not pressed
fi rmly enough against
the surface
Forbidden or
unauthorized Shooting
Nails in the magazine
Magazine not inserted
properly
Foreign object in the
barrel or piston guide
Nail Setting Tool
defective
Shooting Nails do not penetrate deep enough
into the material to be fastened:
Cause(s)
Firing strength too low
Setting nail too long
Target material too hard
Setting nail strikes hard
foreign objects in the
target material, such
as nails
Nail Setting Tool has to
be serviced
Measure(s)
Press the barrel harder
against the surface
See chapter 2.5
„Shooting Nails" and
chapter 6 „Technical
Data
See chapter
2.3 „Magazine
and Single-Shot
Attachment"
See chapter 5
„Inspection and
Cleaning"
Have the Nail Setting
Tool be repaired by an
authorized specialist
workshop
Measure(s)
See chapter 4.3
„Setting the Firing
Strength"
Use a setting nail that
matches the target
material
Aim the Nail Setting
Tool elsewhere
Test the Nail Setting
Tool elsewhere on the
target material
Have the Nail Setting
Tool be serviced/
maintained by an
authorized specialist
workshop

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ddf2130000

Table of Contents