Locking Control Keys; Creating Your Own Startup Screen - ViewSonic VS13645 User Manual

Locking control keys

With the control keys on the projector locked, you can prevent your projector settings
from being changed accidentally (by children, for example). When the Panel Key
Lock is on, no control keys on the projector will operate except
1. Press and hold
projector or remote control.
To release panel key lock, press and hold
3 seconds on the projector.
Important
Keys on the remote control are still functional when panel key lock is
enabled.
If you press
lock, the projector will still be in locked status the next time it is turned on.

Creating your own startup screen

In addition to selecting the projector preset startup screen from ViewSonic logo or User
screen, you can make your own startup screen that is an image projected from your
computer or video source.
1. Press MENU/EXIT on the projector or Menu on the remote control and then press
/ until the Option menu is highlighted.
2. Press to highlight Start up Screen and press ENTER on the projector or
Enter on the remote control.
3. Highlight Screen Capture. Press ENTER on the projector or Enter on the remote
control again.
4. The message 'Screen capture in progress' is displayed while the projector is
processing the picture. Please wait.
5. If the action is successful, you see the message 'Screen capture succeeded' on
the screen. The captured picture is saved as User.
6. To view the captured picture displayed as the startup screen, set User in the
Option > Start up Screen > Start up Screen > User menu and restart the
projector.
In the unlikely event that the capturing action fails, change your target picture.
ViewSonic Pro8500
for 3 seconds on the
Power to turn off the projector without disabling panel key
for
Power.
26