Sony TRINITRON KV-FX29M80 Service Manual page 20

Changing other CH PRESET menu options
1
Press MENU.
2
Press + or – to select the
CH PRESET icon ( ), then
press ENTER.
3
Press + or – to select the
desired option (e.g., SKIP),
then press ENTER.
To
Select
AUTO PROGRAM preset channels automatically.
preset channels manually. See "Presetting channels
MANUAL PROGRAM
manually" on page 26 and 27.
select the TV system. See "Presetting channels manually"
TV SYS
on page 27.
COL SYS select the color system. Normally, set this to "AUTO".
SKIP skip unwanted or unused program numbers.
1 Press + or – until the unused or unwanted program
number appears, then press ENTER.
2 Press + or – to select "ON", then press ENTER.
To put the skipped program number back on, select
"OFF", then press ENTER.
Tip
• For details on the menu system and how to use the menu, refer to
"Introducing the menu system" on page 19 and "How to use the menu"
on page 20.
Note
• If you preset a locked channel, that particular channel will be unlocked
automatically.
ENTER
ENTER
29
Adjusting Your Setup (MENU)
Additional Information
Self-diagnosis
function
Your TV is equipped with a self-diagnosis function. If there is a
problem with your TV, the u indicator flashes red. The number of
times the u indicator flashes indicates the possible causes.
Front of TV
u indicator
1
Check that the u indicator flashes red a number of times between 3-second
intervals.
2
Count the number of times the u indicator flashes.
3
Press U (main power) to turn off your TV.
4
Inform your nearest Sony service center about the number of times the
u indicator flashes.
Be sure to note the model name and serial number located on the rear of
your TV.
30
Additional Information