Sony TRINITRON KV-FX29M80 Service Manual page 19

5
Select the desired
channel.
(1) Press + or – to select
either VHF LOW, VHF
HIGH or UHF, then
press ENTER.
(2) Press + or – until the
desired channel
picture appears on
the TV screen, then
press ENTER.
6
If the sound of the
desired channel is
abnormal, select the
appropriate TV system.
(1) Press + or – to select
TV SYS, then press
ENTER.
(2) Press + or – until the
sound becomes
normal (e.g., M), then
press ENTER.
ENTER
ENTER
ENTER
ENTER
continued
27
Adjusting Your Setup (MENU)
Changing the Channel Preset (CH PRESET) setting (continued)
7
If you are not satisfied
with the picture and
sound quality, you may
improve them by using
fine tuning.
(1) Press + or – to select
FINE, then press
ENTER.
(2) Press + or – to select
MANUAL, then press
ENTER.
(3) Press + or – until the
picture and sound
quality are optimal,
then press ENTER.
The + or – icon on the
menu flashes while
tuning.
To return to the normal screen
Press MENU.
Note
• The TV system (TV SYS) and the fine tuning (FINE) settings are
memorized for each program number.
28
Adjusting Your Setup (MENU)
ENTER
ENTER
ENTER