Sharp GX-31 User Manual page 30

e00_cover_7.book Page 29 Wednesday, March 10, 2004 6:22 PM
Note
• Conference call service may not be available on all
networks. Contact your network operator for more
information.
• You have more options for the Conference call in step
3:
• To put all participants on hold, select "Conference
Hold All".
• To put all participants except the current call on
hold, select "Private".
• To end the call with all participants, select
"Release All".
• To disconnect from the conference call but still
allow the other participants to continue talking
together, select "Transfer".
• To put the current call on hold and continue to
have a conference call with the remaining
participants, select "Exclude".
• To reject adding more participants to the current
party, select "Reject", or you can send the busy
tone by selecting "Busy".
To Add New Participants to the Conference Call
Press A [Options] to display the Options menu.
1.
Press a or b to highlight "Dial", then press
2.
A [Select] to select.
3.
Enter the number you wish to include in the
conference call.
Press D to dial.
4.
Press A [Options] to display the Options menu.
5.
Press a or b to highlight "Multiparty", then press
6.
or A [Select] to select.
Press a or b to highlight "Conference All", then
7.
press to join the conference call.
If you wish to add other participants, repeat steps 1
to 7.
To End the Call with a Conference Call Participant
During a conference call, press a or b to highlight
1.
the person that you wish to disconnect from the
conference call.
Press A [Options] to display the Options menu.
2.
Press a or b to highlight "Release Call", then
3.
or A [Select] to select.
press
or
Call Functions 29