Table of Contents
Advertisement
e00_cover_7.book Page 165 Wednesday, March 10, 2004 6:22 PM
Assigning the Pictures
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken by a digital camera or images
downloaded from a WAP site can be used.
To Set Built-in Pictures
1.
Perform steps 1 to 3 in "Opening the Phone Settings
Screen" on page 158.
Press a or b to highlight "Main Display", then
2.
press
to select.
Press a or b to highlight "Assign Pictures, then
3.
press
to select.
Press a or b to highlight the screen to set the
4.
picture, then press
to select.
Press a or b to highlight "Animation 1" or
5.
"Animation 2", then press
select "Power On" or "Power Off" in step 3.
Or press a or b to highlight "Pattern 1" or
"Pattern 2", then press
"Incoming" or "Alarm" in step 3.
The selected animation or picture is displayed.
6.
Press
to set.
to select when you
to select when you select
Tip
• To cancel the picture setting, select "Default", then
press
in step 5.
To Set Saved Pictures
1.
Perform steps 1 to 3 in "Opening the Phone Settings
Screen" on page 158.
Press a or b to highlight "Main Display", then
2.
press
to select.
Press a or b to highlight "Assign Pictures", then
3.
press
to select.
Press a or b to highlight the screen to set the
4.
picture, then press
to select.
Press a or b to highlight "Picture Gallery", then
5.
press
to select.
Press a or b to highlight "Handset Memory" or
6.
"Memory Card", then press
The file name of the pictures that are registered in
the selected memory-source is displayed.
Press a or b to highlight the picture, then press
7.
to select.
The selected picture is displayed.
Press a, b, c or d to specify the area you wish
8.
to display, then press
.
to select.
Settings
165
Advertisement
Table of Contents
